top of page
pexels-tom-fisk-9742095.jpg
20180808_104252.jpg

ART System Hardware 

ART no back.jpg
laser.png

ART Single Point on profile measurements

1D light glare.png

The ART system originated from single-point measurements on the bin profile. Bin designs with single, central filling chutes and central discharge points and a conical self-emptying floor design aid the application to make it a very affordable solution for smaller silo bins and hopper bins.

​

Variant 1D hardware options include:

  • ART J42 (EX/IECEX/ATEX)

  • ART M 

  • ART M Sigfox (Wireless device)

ART+ (2).jpg
Art+.jpg

ART+ 2D measurements on profile.

2D light glare.png

The ART+ 2D lasers are designed for bigger silo bins. Bin designs with single, central filling chutes and central discharge points and a conical self-emptying floor design aid the application to make it a very affordable solution for medium to large silo bins with this design.

​

Variant 2D hardware options include:

  • ART+ J42 (EX/IECEX/ATEX)

  • ART+ M 

Artemis.jpg
Artemis (2).jpg

ARTEMIS 3D measurements on profile.

3D light glare.png

The ARTEMIS lasers are designed for large silos, domes, stockpiles, and warehouses. Bin, lay down area, and warehouse design does not play such a big role in terms of the shape of it since the aim is to cover the whole area with a scan, or a combination of scans from various installed positions. Space above the profile is essential to eliminate possible blind spots on the profile scan. 

​

Variant 3D hardware options include:

  • ARTEMIS J42 (EX/IECEX/ATEX)

  • ARTEMIS J300

  • ARTEMIS M 

  • ARTEMIS LH15 (Lidar)

  • ARTEMIS Mid70 (Lidar)

bottom of page